| YİĞİT A., ARSLANOĞLU N., GUL H. |
TRANSIENT THERMAL MODELING AND PERFORMANCE ANALYSIS OF PHOTOVOLTAIC PANELS |
ENVIRONMENTAL PROGRESS AND SUSTAINABLE ENERGY |
2023 |
(SCI-Expanded) |
| BIYIKLI M., KARAGOZ T., CALLI M., MUSLIM T., ÖZALP A. A., BAYRAM A. |
SINGLE TRACK GEOMETRY PREDICTION OF LASER METAL DEPOSITED 316L-SI VIA MULTI-PHYSICS MODELLING AND REGRESSION ANALYSIS WITH EXPERIMENTAL VALIDATION |
METALS AND MATERIALS INTERNATIONAL |
2023 |
(SCI-Expanded) |
| MİNDİVAN F., MİNDİVAN H., BAYRAM A. |
THE ELECTROLESS MONOLAYER AND DUPLEX NI–B AND NI–P COATINGS FOR 316L STAINLESS STEEL IN SYNERGISTIC COMBINATION OF MECHANICAL (WEAR) AND CHEMICAL (CORROSION) PROCESSES |
ADVANCED ENGINEERING MATERIALS |
2023 |
(SCI-Expanded) |
| ARI A., BAYRAM A., KARAHAN M., ARSLAN O. |
COMPARATIVE EVALUATION OF MECHANICAL PROPERTIES OF SHORT ARAMID FIBER ON THERMOPLASTIC POLYMERS |
MATERIALS SCIENCE-POLAND |
2023 |
(SCI-Expanded) |
| MEHTA P., YILDIZ B. S., SAIT S. M., YILDIZ A. R. |
A NOVEL HYBRID FICK'S LAW ALGORITHM-QUASI OPPOSITIONAL-BASED LEARNING ALGORITHM FOR SOLVING CONSTRAINED MECHANICAL DESIGN PROBLEMS |
MATERIALPRUEFUNG/MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| KOPAR M., YLLDLZ A. R., YLLDLZ B. S. |
OPTIMUM DESIGN OF A COMPOSITE DRONE COMPONENT USING SLIME MOLD ALGORITHM |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| ERDAŞ M. U., KOPAR M., YILDIZ B. S., YILDIZ A. R. |
OPTIMUM DESIGN OF A SEAT BRACKET USING ARTIFICIAL NEURAL NETWORKS AND DANDELION OPTIMIZATION ALGORITHM |
MATERIALPRUEFUNG/MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| KOPAR M., YILDIZ A. R. |
EXPERIMENTAL INVESTIGATION OF MECHANICAL PROPERTIES OF PLA, ABS, AND PETG 3-D PRINTING MATERIALS USING FUSED DEPOSITION MODELING TECHNIQUE |
MATERIALPRUEFUNG/MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| CHAMPASAK P., PANAGANT N., PHOLDEE N., BUREERAT S., RAJENDRAN P., YILDIZ A. R. |
GRID-BASED MANY-OBJECTIVE OPTIMISER FOR AIRCRAFT CONCEPTUAL DESIGN WITH MULTIPLE AIRCRAFT CONFIGURATIONS |
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE |
2023 |
(SCI-Expanded) |
| RAJA B. D., PATEL, V. K., YILDIZ A. R., KOTECHA P. |
PERFORMANCE OF SCIENTIFIC LAW-INSPIRED OPTIMIZATION ALGORITHMS FOR CONSTRAINED ENGINEERING APPLICATIONS |
ENGINEERING OPTIMIZATION |
2023 |
(SCI-Expanded) |
| MENG Z., QIAN Q., XU M., YU B., YILDIZ A. R., MIRJALILI S. |
PINN-FORM: A NEW PHYSICS-INFORMED NEURAL NETWORK FOR RELIABILITY ANALYSIS WITH PARTIAL DIFFERENTIAL EQUATION |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2023 |
(SCI-Expanded) |
| GÜRSES D., MEHTA P., SAIT S. M., KUMAR S., YILDIZ A. R. |
A MULTI-STRATEGY BOOSTED PRAIRIE DOG OPTIMIZATION ALGORITHM FOR GLOBAL OPTIMIZATION OF HEAT EXCHANGERS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| MENG Z., YILDIZ B. S., LI G., ZHONG C., MIRJALILI S., YILDIZ A. R. |
APPLICATION OF STATE-OF-THE-ART MULTIOBJECTIVE METAHEURISTIC ALGORITHMS IN RELIABILITY-BASED DESIGN OPTIMIZATION: A COMPARATIVE STUDY |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2023 |
(SCI-Expanded) |
| KOPAR M., YILDIZ A. R. |
COMPOSITE DISC OPTIMIZATION USING HUNGER GAMES SEARCH OPTIMIZATION ALGORITHM |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| SAIT S. M., MEHTA P., GÜRSES D., YILDIZ A. R. |
CHEETAH OPTIMIZATION ALGORITHM FOR OPTIMUM DESIGN OF HEAT EXCHANGERS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| YILDIZ B. S., KUMAR S., PANAGANT N., MEHTA P., SAIT S. M., YILDIZ A. R., ET AL. |
A NOVEL HYBRID ARITHMETIC OPTIMIZATION ALGORITHM FOR SOLVING CONSTRAINED OPTIMIZATION PROBLEMS |
KNOWLEDGE-BASED SYSTEMS |
2023 |
(SCI-Expanded) |
| ANOSRI S., PANAGANT N., CHAMPASAK P., BUREERAT S., THIPYOPAS C., KUMAR S., ET AL. |
A COMPARATIVE STUDY OF STATE-OF-THE-ART METAHEURISTICS FOR SOLVING MANY-OBJECTIVE OPTIMIZATION PROBLEMS OF FIXED WING UNMANNED AERIAL VEHICLE CONCEPTUAL DESIGN |
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING |
2023 |
(SCI-Expanded) |
| SABANGBAN N., PANAGANT N., BUREERAT S., WANSASUEB K., KUMA S., YILDIZ A. R., ET AL. |
SIMULTANEOUS AERODYNAMIC AND STRUCTURAL OPTIMISATION OF A LOW-SPEED HORIZONTAL-AXIS WIND TURBINE BLADE USING METAHEURISTIC ALGORITHMS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| YILDIRIM A., DEMIRCI E., KARAGÖZ S., ÖZCAN S., YILDIZ A. R. |
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF CRASHWORTHINESS PERFORMANCE FOR OPTIMAL AUTOMOBILE STRUCTURES USING RESPONSE SURFACE METHODOLOGY AND OPPOSITIONAL BASED LEARNING DIFFERENTIAL EVOLUTION ALGORITHM |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| RAJA B. D., PATEL V. K., SAVSANI V. J., YILDIZ A. R. |
ON THE COMPARATIVE PERFORMANCE OF RECENT SWARM INTELLIGENCE BASED ALGORITHMS FOR OPTIMIZATION OF REAL-LIFE STERLING CYCLE OPERATED REFRIGERATION/LIQUEFACTION SYSTEM |
ARTIFICIAL INTELLIGENCE REVIEW |
2023 |
(SCI-Expanded) |
| KUMAR S., YILDIZ B. S., MEHTA P., PANAGANT N., SAIT S. M., MIRJALILI S., ET AL. |
CHAOTIC MARINE PREDATORS ALGORITHM FOR GLOBAL OPTIMIZATION OF REAL-WORLD ENGINEERING PROBLEMS |
KNOWLEDGE-BASED SYSTEMS |
2023 |
(SCI-Expanded) |
| MEHTA P., SULTAN YLLDLZ B. S., PHOLDEE N., KUMAR S., RIZA YILDIZ A. R., SAIT S. M., ET AL. |
A NOVEL GENERALIZED NORMAL DISTRIBUTION OPTIMIZER WITH ELITE OPPOSITIONAL BASED LEARNING FOR OPTIMIZATION OF MECHANICAL ENGINEERING PROBLEMS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| AYE C. M., WANSASEUB K., KUMAR S., TEJANI G. G., BUREERAT S., YILDIZ A. R., ET AL. |
AIRFOIL SHAPE OPTIMISATION USING A MULTI-FIDELITY SURROGATE-ASSISTED METAHEURISTIC WITH A NEW MULTI-OBJECTIVE INFILL SAMPLING TECHNIQUE |
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES |
2023 |
(SCI-Expanded) |
| YILDIZ B. S., PHOLDEE N., MEHTA P., SAIT S. M., KUMAR S., BUREERAT S., ET AL. |
A NOVEL HYBRID FLOW DIRECTION OPTIMIZER-DYNAMIC OPPOSITIONAL BASED LEARNING ALGORITHM FOR SOLVING COMPLEX CONSTRAINED MECHANICAL DESIGN PROBLEMS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| MUMCU A. G., AVCI A. |
PARAMETRIC AND GENERAL EVALUATION OF MATHEMATICAL MODELS USED FOR CRITICAL DIAMETER DETERMINATION IN CYCLONE SEPARATORS |
SEPARATIONS |
2023 |
(SCI-Expanded) |
| SÜRMEN A., KARAMANGİL M. İ., AVCI A., DIRIM B., IŞIKLI F., TEKİN M. E., ET AL. |
EXPERIMENTAL ANALYSIS OF THE VOLUMETRIC AND THERMAL EFFICIENCY PERFORMANCE OF A NOVEL DIRECT PIEZO-ACTING CVVT MECHANISM |
INTERNATIONAL JOURNAL OF GREEN ENERGY |
2023 |
(SCI-Expanded) |
| ÇELİK A. G., PULAT E., SOKMEN F., BALKAN C., COŞKUN S. |
NUMERICAL AND EXPERIMENTAL INVESTIGATION OF ENERGY EFFICIENCY BY APPLYING PHASE CHANGE MATERIAL TO OPEN VERTICAL TYPE REFRIGERATED DISPLAY CABINET |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2023 |
(SCI-Expanded) |
| YALÇINSOY E., ATEŞ M., PULAT E. |
COMPUTATIONAL INVESTIGATION OF BACKWARD FACING STEP EFFECT ON HEAT TRANSFER FROM FLUSH MOUNTED ELECTRONIC CHIPS IN TURBULENT FLOW TÜRBÜLANSLI AKIŞTA YÜZEYLE AYNI HIZADA MONTE EDILMIŞ ELEKTRONIK YONGALARDAN OLAN ISI TRANSFERI ÜZERINE GERI BASAMAK ETKISININ HESAPLAMALI OLARAK ARAŞTIRILMASI |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2023 |
(SCI-Expanded) |
| KUCUKOGLU A., YÜCE C., SOZER I. E., KARPAT F. |
MULTI-RESPONSE OPTIMIZATION FOR LASER TRANSMISSION WELDING OF PMMA TO ABS USING TAGUCHI-BASED TOPSIS METHOD |
ADVANCES IN MECHANICAL ENGINEERING |
2023 |
(SCI-Expanded) |
| SAVRAN E., KALAY O. C., ALP N. B., KARPAT F. |
DESIGN AND ANALYSIS OF LATTICE STRUCTURE APPLIED HUMERUS SEMI-PROSTHESIS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| KALAY O. C., KARPAT E., DIRIK A. E., KARPAT F. |
A ONE-DIMENSIONAL CONVOLUTIONAL NEURAL NETWORK-BASED METHOD FOR DIAGNOSIS OF TOOTH ROOT CRACKS IN ASYMMETRIC SPUR GEAR PAIRS |
MACHINES |
2023 |
(SCI-Expanded) |
| KALAY O. C., DOGAN O., YÜCE C., KARPAT F. |
EFFECTS OF TOOTH ROOT CRACKS ON VIBRATION AND DYNAMIC TRANSMISSION ERROR RESPONSES OF ASYMMETRIC GEARS: A COMPARATIVE STUDY |
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES |
2023 |
(SCI-Expanded) |
| DOGAN O., KALAY O. C., KARPAT F. |
INFLUENCE OF TOOTH ROOT CRACKS ON THE MESH STIFFNESS OF ASYMMETRIC SPUR GEAR PAIR WITH DIFFERENT BACKUP RATIOS |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
2023 |
(SCI-Expanded) |
| KALAY O. C., YUCE C., DOĞAN O., YILMAZ T. G., KARPAT E., KOPMAZ O., ET AL. |
FATIGUE PERFORMANCES OF HELICOPTER GEARS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| TUNÇEL O., AYDIN H., DAVUT K. |
EFFECT OF HEAT INPUT ON HAZ SOFTENING IN FIBER LASER WELDING OF 22MNB5 STEEL |
OPTICS AND LASER TECHNOLOGY |
2023 |
(SCI-Expanded) |
| KARŞI A., ALTAY M., AYDIN H., BAYRAM A. |
OPTIMIZATION OF LASER CLADDING PROCESS PARAMETERS OF A MARTENSITIC STAINLESS STEEL COATING ON GGG70L DUCTILE CAST IRON |
LASERS IN ENGINEERING |
2023 |
(SCI-Expanded) |
| ÇALIŞKAN M. E., KAYA F., SABIRLI M. U., KARAGÖZ İ. |
DESIGN OF A BIOMIMETIC WING FROM MAPLE SAMARA AND INVESTIGATION OF THE AERODYNAMIC PERFORMANCE |
PHYSICS OF FLUIDS |
2023 |
(SCI-Expanded) |
| AYDIN N., CALISKAN M. E., SABIRLI M. U., KARAGÖZ İ. |
AN EXPERIMENTAL STUDY OF THE AERODYNAMIC PERFORMANCE OF A MAPLE WING MODEL AT LOW REYNOLDS NUMBERS |
MECHANICS RESEARCH COMMUNICATIONS |
2023 |
(SCI-Expanded) |
| CELIK E., KARAGÖZ İ. |
INVESTIGATION OF THE EFFECTS OF INTERMEDIATE RESERVOIRS AND INTERMEDIATE FEEDINGS APPLICATIONS ON THE PERFORMANCE OF PROTON EXCHANGE MEMBRANE FUEL CELLS |
FUEL |
2023 |
(SCI-Expanded) |
| KANBIR O., TASYAKAN E., CAVDAR K. |
EFFECT OF ATMOSPHERIC PRESSURE PLASMA TREATMENT ON THE ADHESIVE BONDS OF METAL SURFACES |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2023 |
(SCI-Expanded) |
| GÜLER H., AYAS K., ÇAVDAR K. |
INVESTIGATION OF THE EFFECT OF ENVIRONMENT FRIENDLY ATMOSPHERIC PRESSURE COLD PLASMA APPLICATION ON BOND STRENGTH OF POM AND PP MATERIALS ÇEVRE DOSTU ATMOSFERIK BASINÇLI SOĞUK PLAZMA UYGULAMASININ POM VE PP MALZEMELERIN YAPIŞTIRMA BAĞI DAYANIMINA ETKISININ ARAŞTIRILMASI |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2023 |
(SCI-Expanded) |
| KILIÇ M., ALTUN A. F. |
COMPREHENSIVE THERMODYNAMIC PERFORMANCE EVALUATION OF VARIOUS GAS LIQUEFACTION CYCLES FOR CRYOGENIC ENERGY STORAGE |
SUSTAINABILITY |
2023 |
(SCI-Expanded) |
| SEVİLGEN G., DURSUN H., KILIÇ M. |
EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ON THE THERMAL PERFORMANCE OF THREE DIFFERENT COLD PLATES DESIGNED FOR THE ELECTRICAL VEHICLE BATTERY MODULE |
SUSTAINABILITY (SWITZERLAND) |
2023 |
(SCI-Expanded) |
| SEVILGEN G., DURSUN H., KILIÇ M. |
EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ON THE THERMAL PERFORMANCE OF THREE DIFFERENT COLD PLATES DESIGNED FOR THE ELECTRICAL VEHICLE BATTERY MODULE |
SUSTAINABILITY |
2023 |
(SCI-Expanded) |
| KILIÇ M., GAMSIZ S., ALINCA Z. N. |
COMPARATIVE EVALUATION AND MULTI-OBJECTIVE OPTIMIZATION OF COLD PLATE DESIGNED FOR THE LITHIUM-ION BATTERY PACK OF AN ELECTRICAL PICKUP BY USING TAGUCHI-GREY RELATIONAL ANALYSIS |
SUSTAINABILITY |
2023 |
(SCI-Expanded) |
| KILIÇ M., ALTUN A. F. |
DYNAMIC MODELLING AND MULTI-OBJECTIVE OPTIMIZATION OF OFF-GRID HYBRID ENERGY SYSTEMS BY USING BATTERY OR HYDROGEN STORAGE FOR DIFFERENT CLIMATES |
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
2023 |
(SCI-Expanded) |
| SEVILGEN G., KILIÇ M., BAYRAM H., BAŞAK E., DURSUN H. |
THE INVESTIGATION OF THE INNOVATIVE HYBRID HEAT PUMP SYSTEM DESIGNED AND PROTOTYPED FOR HEATING PROCESS OF ELECTRIC VEHICLES |
AEJ - ALEXANDRIA ENGINEERING JOURNAL |
2023 |
(SCI-Expanded) |
| ÖZDEMIR KÜÇÜK E., KILIÇ M. |
EXERGOECONOMIC ANALYSIS AND MULTI-OBJECTIVE OPTIMIZATION OF ORC CONFIGURATIONS VIA TAGUCHI-GREY RELATIONAL METHODS |
HELIYON |
2023 |
(SCI-Expanded) |
| ÖZDEMIR KÜÇÜK E., KILIÇ M. |
EXERGOECONOMIC AND EXERGETIC SUSTAINABILITY ANALYSIS OF A COMBINED DUAL-PRESSURE ORGANIC RANKINE CYCLE AND VAPOR COMPRESSION REFRIGERATION CYCLE |
SUSTAINABILITY |
2023 |
(SCI-Expanded) |
| BAKIRCI A., KOCA S., ERDOGAN O., ÇAKIR M. C. |
WEAR AND RESIDUAL STRESS IN HIGH-FEED MILLING OF AISI H13 TOOL STEEL |
MATERIALPRUEFUNG/MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| BILBAY F. B., ASLAN E., BARIŞ E., ÇAKIR M. C. |
INVESTIGATION OF THE EFFECT AND OPTIMIZATION OF MATERIAL PROPERTIES ON THE PRINTED CIRCUIT BOARD |
COMPOSITES AND ADVANCED MATERIALS |
2023 |
(SCI-Expanded) |
| BOKE T. A., ALBAK E. İ., KAYA N., BOZKURT R., ERGUL M., OZTURK D., ET AL. |
CORRELATION BETWEEN OBJECTIVE AND SUBJECTIVE TESTS FOR VEHICLE RIDE COMFORT EVALUATIONS |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING |
2023 |
(SCI-Expanded) |
| ARSLANOĞLU N. |
MODELING OF DIFFUSE SOLAR RADIATION EXERGY IN TURKEY: COMPARISON OF DIFFUSE FRACTION AND DIFFUSION COEFFICIENT MODELS |
ENVIRONMENTAL PROGRESS AND SUSTAINABLE ENERGY |
2023 |
(SCI-Expanded) |
| DUNDAR A., ARSLANOĞLU N. |
MULTI-OBJECTIVE OPTIMIZATION OF PARAMETERS AFFECTING THE PERFORMANCE OF PARABOLIC SOLAR COLLECTORS BY TAGUCHI, ANOVA, AND GREY RELATIONAL ANALYSIS METHOD |
HEAT TRANSFER RESEARCH |
2023 |
(SCI-Expanded) |
| BINGÜL Ö., YILDIZ A. |
FUZZY LOGIC AND PROPORTIONAL INTEGRAL DERIVATIVE BASED MULTI-OBJECTIVE OPTIMIZATION OF ACTIVE SUSPENSION SYSTEM OF A 4×4 IN-WHEEL MOTOR DRIVEN ELECTRICAL VEHICLE |
JVC/JOURNAL OF VIBRATION AND CONTROL |
2023 |
(SCI-Expanded) |
| KOCYIGIT F., KAYA A. M. |
THERMAL AND MECHANICAL PROPERTIES OF A NEW INSULATION COMPOSITE MATERIAL |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| KÜÇÜKDEMİRCİ KAYA P., KAYA A. M., GIRGIN N. K., KAHVECI F. Ş., AKALIN E. H., İŞÇİMEN R. |
SEPSIS EPISODES CAUSED BY PRESSURE INJURIES IN CRITICAL ILLNESS: A RETROSPECTIVE OBSERVATIONAL COHORT STUDY |
WOUND MANAGEMENT AND PREVENTION |
2023 |
(SCI-Expanded) |
| TÜFEKCİ K., ÇAKAN B., KÜÇÜKAKARSU V. M. |
STRESS RELAXATION OF 3D PRINTED PLA OF VARIOUS INFILL ORIENTATIONS UNDER TENSILE AND BENDING LOADINGS |
JOURNAL OF APPLIED POLYMER SCIENCE |
2023 |
(SCI-Expanded) |
| ŞENER B., ÇAVUŞOĞLU O., YÜCE C. |
EFFECTS OF PROCESS PARAMETERS ON SURFACE QUALITY AND MECHANICAL PERFORMANCE OF 316L STAINLESS STEEL PRODUCED BY SELECTIVE LASER MELTING |
OPTIK |
2023 |
(SCI-Expanded) |
| ÇAVUŞOĞLU O., YUCE C., AYDIN H. |
MECHANICAL CHARACTERIZATION AND MICROSTRUCTURE OF FIBER LASER WELDED TWIP980 STEEL DEPENDING ON WELDING SPEED AND FOCAL DISTANCE |
OPTIK |
2023 |
(SCI-Expanded) |
| TÜRKKAN Y. A., ASLAN M., TARKAN A., ASLAN Ö., YÜCE C., YAVUZ N. |
MULTI-OBJECTIVE OPTIMIZATION OF FIBER LASER CUTTING OF STAINLESS-STEEL PLATES USING TAGUCHI-BASED GREY RELATIONAL ANALYSIS |
METALS |
2023 |
(SCI-Expanded) |
| ERZAN TOPÇU E., KILIÇ E. |
A NUMERICAL INVESTIGATION OF SLOSHING IN A 3D PRISMATIC TANK WITH VARIOUS BAFFLE TYPES, FILLING RATES, INPUT AMPLITUDES AND LIQUID MATERIALS |
APPLIED SCIENCES |
2023 |
(SCI-Expanded) |
| ÖÇAL A. E., LEKESIZ H., ÇETIN S. |
THE DEVELOPMENT OF AN INNOVATIVE OCCUPATIONAL PASSIVE UPPER EXTREMITY EXOSKELETON AND AN INVESTIGATION OF ITS EFFECTS ON MUSCLES |
APPLIED SCIENCES |
2023 |
(SCI-Expanded) |
| AKÇAY S., Ş EFKAT G. |
VIBRATIONAL COMFORT IMPROVEMENT FOR A PASSENGER CAR DRIVER SEAT |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| REIS M., TÜFEKCI K. |
A VARIABLE CLUTCH MECHANISM FOR ADJUSTABLE STIFFNESS ACTUATORS BASED ON BENDING AND TORSION OF PRISMATIC BEAMS |
ACTUATORS |
2023 |
(SCI-Expanded) |
| SUNAY N., KAYA M., YILMAZ M. S., KAYNAK Y. |
EFFECTS OF HEAT TREATMENT ON SURFACE INTEGRITY AND WEAR PERFORMANCE OF INCONEL 718 ALLOY FABRICATED BY LASER POWDER BED FUSION PROCESS ADDITIVE MANUFACTURING UNDER DIFFERENT LASER POWER AND SCANNING SPEED PARAMETERS |
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
2023 |
(SCI-Expanded) |
| ÇAKAN D., ERTUĞRUL O., YILMAZ M. S. |
AGING HEAT TREATMENT OF ADDITIVELY MANUFACTURED MARAGING STEELS IN NITROGEN CONTAINING ATMOSPHERES |
MATERIALS TODAY COMMUNICATIONS |
2023 |
(SCI-Expanded) |
| KHAN H. M., YILMAZ M. S., KARABEYOĞLU S. S., KISASÖZ A., ÖZER G. |
DRY SLIDING WEAR BEHAVIOR OF 316 L STAINLESS STEEL PRODUCED BY LASER POWDER BED FUSION: A COMPARATIVE STUDY ON TEST TEMPERATURE |
MATERIALS TODAY COMMUNICATIONS |
2023 |
(SCI-Expanded) |
